Skip to main content

Filter By:

  • Show More Brands

  • Show Fewer Brands
  • Show More Sizes
  • Show Fewer Sizes

Wheels

Zipp 404 Firecrest Tubeless Disc B1 Front
$976.00
- Versatile aero wheelset for the modern road bike with tubeless and hookless rim profile - Optimized tire bed for easy tire installation - Wide 23mm rim profile creates a better tire interface to be fast on or off the road - New ZR1 DB hub is engineered in Germany with better seal design for improved durability and quicker response with 66 points of engagement - Ships with 12mm front and rear end caps - Center locking rotor interface. Lockring is included with the wheels - 1470g - Lifetime warranty
WTB TCS AL 34mm Presta Valve
$24.95
WTB's TCS AL valves are aluminum to shed grams, and come in catchy anodized red, black, or blue. A stepped lock nut adds compatibility among various rim drillings, a smooth pump interface makes adding air easy, and a removable core makes setting beads and injecting sealant a cinch. - Presta - 34mm
Sunlite Quick Release Skewer (Rear, 161mm)
$12.99
• Replacement aluminum quick release skewers
Stan's No Tubes Neo Front Hub End Caps
$20.00 - $21.00
Front end cap conversion kits for NoTubes Neo and Neo Ultimate - SealLock end caps feature a low friction U-cup seal that snaps into place
Stan's No Tubes Presta Removeable Valve Core
$3.00
Stan's No Tubes' Presta Removable Valve Core is a replacement valve core for Stan's No Tubes Presta valve stems and Presta valve equipped rim strips.
Stan's No Tubes Rim Tape
$12.99 - $25.00
Can be used with Stan's ZTR rims to make them airtight or used as a lightweight rim tape in any rim. A single 10-yard roll will tape five 26-inch rims or four 29-inch rims or two wide road clincher rims. 21mm width fits: - ZTR Olympic - ZTR Iron Cross - ZTR 355 - ZTR Alpine - ZTR Crest - ZTR Alpha 340 (2 layers) - ZTR Alpha 400 (2 layers) - Most road clincher rims 25mm width fits: - ZTR 355 (26", 650b, 29") - ZTR Crest - Crest MK3 - ZTR Arch EX - ZTR Flow EX - Crest S1 27mm width fits: - ZTR Flow EX - ZTR Bravo - ZTR Hugo 52mm - Arch S1 - ZTR Rapid 28 - ZTR Rapid 30 - Arch MK3 30mm width fits: - ZTR Flow MK3
Stan's No Tubes Tubeless Valve Stems
$18.00
Use Stan's Tubeless Valve Stems when you're converting standard rims to tubeless via the taping method. These also have a removable core for easier application of tire sealant. Note: Schrader valve is for non-stepped Hugo rims. If your Hugo rim decal reads: - MAX RIM PRESSURE: 2.8 tires: 26psi, 3.0 tires: 24psi - ERD 615, 622x49.9, 29 in x 52.3mm Your rim has a stepped valve and is not compatible with this Schrader valve.
Sta-Tru 27-inch Rear Wheel
$69.99 - $75.00
Sta Tru Rear Wheels - Hub/Brake Compatibility: Rim Brake - Wheel Size: 27" - Cassette Body Type: Threaded Standard 1.37" x 24tpi - ISO Diameter: 630 / 27" - Tire Type: Clincher
Origin8 Pro Pulsion Rim Strips
$5.99 - $8.00
Origin-8's Pro Pulsion Rim Strips are made from a super-durable, environmentally friendly PVC material.
Lezyne CNC TLR Valve Pair
$20.99 - $21.99
- CNC-machined tubeless valves with aluminum stem nut and valve core wrench cap - Fit for most other tubeless rims and wheel
HED ARDENNES RA PRO (RIM BRAKE)
$900.00
The original all-road bike wheel. Rolling valleys, dense forests, cobbled byways. The Ardennes region of Southeast Belgium is cycling holy ground, a setting that has tested the mettle of the sport’s greatest riders for a century. Mettle meets metal in the HED Ardennes RA Pro, our go-anywhere, do-anything alloy wheel set that was crushing gravel a decade before the competition. FEATURES: Built in the U.S.A. 1,555g per Wheel Set (rim brake) 21mm Internal Width, 25mm External Width Disc and Rim Brake Options Available
HED HED ARDENNES RA PERFORMANCE (DISC BRAKE)
$700.00
The original all-road bike wheel. Rolling valleys, dense forests, cobbled byways. The Ardennes region of Southeast Belgium is cycling holy ground, a setting that has tested the mettle of the sport’s greatest riders for a century. Mettle meets metal in the HED Ardennes RA Pro, our go-anywhere, do-anything alloy wheel set that was crushing gravel a decade before the competition. Built in the U.S.A. 1,530g per Wheel Set (disc brake) 21mm Internal Width, 25mm External Width Disc and Rim Brake Options Available
HED HED EMPORIA GA PRO Disc Wheelset Shimano
$950.00
Ride it all with HED’s Emporia GA Pro wheel set! HED’s new generation of aluminum gravel wheels give you the freedom to explore with speed and efficiency. FEATURES: Built in the U.S.A. 700c and 650b Options Available 25mm Internal Width, 30mm External Width HED Sonic Pro Centerlock Disc Brake Hubs Tubeless Compatible
HED HED EMPORIA GC3 PRO Disc 12
$2,400.00
The Emporia GC3 Pro. There are gravel kings and then there are gravel emperors. Inspired by the people and town of Emporia, Kansas, hosts of the most iconic gravel event in the world, the Emporia GC3 Pro isn’t designed to ride gravel; it’s designed to crush it. With an internal width of 26mm and a signature 30mm aerodynamic rim profile, the Emporia GC3 Pro wheel will make you question if you’re riding gravel or time trialing away from everyone else. FEATURES: Handmade in the U.S.A. 1,420g per Wheel Set 26mm Internal, 31mm External Rim Width HED Sonic Pro Centerlock Disc Brake Hubs Tubeless Compatible
HED Vanquish RC4Pro Carbon 12mm Thru Axel Shimano Free Hub Body
$2,600.00
HED’s Fastest Wheel. Ever. For HED, that’s saying something. It all begins with our patented, wind-tunnel decimating toroidal rim profile, which is handmade by our team here in Minnesota. Boasting drag numbers that can drop below -100g, the Vanquish RC Pro series features wheels that are simply faster than the competition. Blink and you just might miss them. FEATURES: Handmade in the U.S.A. Rim depths ranging from 40mm to a complete Aero Disc Wheel set weights starting at 1,455g with the Vanquish RC4 Pro HED Sonic Pro Centerlock Disc Brake Hubs Tubeless Compatible
Giant SLR 1 42 Front
$685.00
The SLR 1 42 WheelSystems are efficient, lightweight, all-around, carbon road wheels that bring premium-level performance to all riders. Featuring hookless rim design and optimized carbon layup to ensure a robust yet lightweight structure, contemporary wider inner width, low friction hubs offering low rolling resistance, and Dynamic Balanced Lacing (DBL) technology to maintain maximum power efficiency, the SLR 1 42 and SLR 1 42 Disc bring outstanding performance at no compromise. - Hookless rim design enhances overall durability and offers a wider inner rim width without adding weight - Optimized carbon layup features high tensile strength carbon fiber placed at the most crucial points to provide stiff, compliant, and lightweight wheels - Low friction hub with precision machined internals eliminates excessive bearing load, reducing bearing friction, lowering rolling resistance, and minimizing power loss - Dynamic Balanced Lacing (DBL) ensures spokes are set for optimal tension when pedaling, resulting in enhanced durability and transmission efficiency - The enlarged DBL hub flange increases spoke bracing angles, boosting overall torsional, transmissional, and lateral stiffness for better power transfer - Giant's proprietary High Glass Transition Temperature (Tg) resin enhances the rim's overall durability and braking performance - 42mm-deep all-round rim profile with an updated inner width offers better support for today's higher volume road tires
Giant SLR 1 42 Rear
$880.00
The SLR 1 42 WheelSystems are efficient, lightweight, all-around, carbon road wheels that bring premium-level performance to all riders. Featuring hookless rim design and optimized carbon layup to ensure a robust yet lightweight structure, contemporary wider inner width, low friction hubs offering low rolling resistance, and Dynamic Balanced Lacing (DBL) technology to maintain maximum power efficiency, the SLR 1 42 and SLR 1 42 Disc bring outstanding performance at no compromise. - Hookless rim design enhances overall durability and offers a wider inner rim width without adding weight - Optimized carbon layup features high tensile strength carbon fiber placed at the most crucial points to provide stiff, compliant, and lightweight wheels - Low friction hub with precision machined internals eliminates excessive bearing load, reducing bearing friction, lowering rolling resistance, and minimizing power loss - Dynamic Balanced Lacing (DBL) ensures spokes are set for optimal tension when pedaling, resulting in enhanced durability and transmission efficiency - The enlarged DBL hub flange increases spoke bracing angles, boosting overall torsional, transmissional, and lateral stiffness for better power transfer - Giant's proprietary High Glass Transition Temperature (Tg) resin enhances the rim's overall durability and braking performance - 42mm-deep all-round rim profile with an updated inner width offers better support for today's higher volume road tires
Giant SLR 2 42 Front
$500.00
The SLR 2 42 WheelSystems are lightweight and robust carbon wheels that are built to last. Combining hookless rim design and optimized carbon layup with a modern, 19.4mm inner width, the SLR 2 42 & SLR 2 42 Disc deliver great value to performance cyclists who require minimal tradeoff between price, weight, and durability. - Hookless rim design enhances overall durability and offers a wider inner rim width without adding weight - Optimized carbon layup features high tensile strength carbon fiber placed at the most crucial points to provide stiff and lightweight wheels - 42mm deep all-round rim profile with a 19.4mm inner width offers better support for today's higher volume road tires - Giant's proprietary High Glass Transition Temperature (Tg) resin enhances the rim's overall durability and braking performance
Giant SLR 2 42 Rear
$595.00
The SLR 2 42 WheelSystems are lightweight and robust carbon wheels that are built to last. Combining hookless rim design and optimized carbon layup with a modern, 19.4mm inner width, the SLR 2 42 & SLR 2 42 Disc deliver great value to performance cyclists who require minimal tradeoff between price, weight, and durability. - Hookless rim design enhances overall durability and offers a wider inner rim width without adding weight - Optimized carbon layup features high tensile strength carbon fiber placed at the most crucial points to provide stiff and lightweight wheels - 42mm deep all-round rim profile with a 19.4mm inner width offers better support for today's higher volume road tires - Giant's proprietary High Glass Transition Temperature (Tg) resin enhances the rim's overall durability and braking performance
ENVE Composites G23 ENVE Alloy Hub Wheelset
$2,550.00
What It Is The G23 is the definition of a true gravel wheelset. At 330 grams, ENVE's lightest 700c tubeless rim accelerates quickly and ascends with ease. Armed against pinch flats with the patent-pending Wide Hookless Bead, the G23 is tough and relentless on road, path, or trail. The G23 is a 700c tubeless carbon clincher wheelset with a generous 23mm internal width, specifically conceived to meet the performance and ride quality demands of serious mixed-surface cyclists. Who It's For Created for those seeking to discover new experiences, new terrain, and new challenges. Built to reflect the versatility of today's gravel and mixed surface riders, these wheels will excite ambitious, daring, and indomitable riders everywhere. If your path leads to classics like Dirty Kanza, Landrun, Crusher in the Tushar, or a new wave of events like Grinduro or Lost and Found, the G23 is your wheel. Why We Made It There is a place between road and mountain that is open to discovery. Beyond the range of your trail bike or the capabilities of your road bike. Terrain littered with contradicting challenges and demanding requirements are at odds with the bikes and products available today. We built the new G23 to thrive in this new environment, because insights gained through building the world's best road and mountain bike rims told us that the perfect combination did not exist in our stable, or in our opinion, anywhere at all. The higher volume and lower pressures would demand MTB toughness and flat resistance, while big days and long miles would require the lightweight and efficiency of a road machine. Above all, the combination of rough and rigid would require a wheel with the ride quality to make those long miles enjoyable and multi-day treks possible.
ENVE Composites M525 29-inch I9 Wheelset
$2,550.00
What It Is A purpose-built XC wheelset without limitations. Light enough to race, strong enough to ride daily. Reduced fatigue and a more compliant ride through shape, laminate, and spoke-hole optimization. Who It's For Modern XC racers and riders who demand equal uphill and downhill performance, light weight, durability, and vertical compliance for long hours in the saddle. Why We Made It Carbon fiber is responsible for unlocking the potential of bigger and wider tires on mountain bikes. Today, riders can improve comfort, efficiency, and control by adapting their mountain bikes perfectly for the terrain and trails. Undoubtedly, this means they can go further and faster with more confidence. Complement increased tire volumes and rim widths with a modern XC tread, and you've got an effective system, maximized for the variable-pitch trail. The result is a purpose-built full-carbon fiber XC wheelset that is lighter, wider, and more vertically compliant without sacrificing strength or reliability. Additionally, the M525 features ENVE's patent pending, wide hookless beads that improve pinch flat resistance and allow riders to run modern lightweight XC tires with a reduced risk of pinch flatting or impact damage.
ENVE Composites M630 29-inch I9 Wheelset
$2,550.00
What It Is The definitive mountain wheel. The M6 Series defines the modern and varied interpretation of the mountain bike. Loaded with traction and acceleration on the climb, it's also backed with precision and control while absorbing vibrations and impacts on the descent. The M6 Series is designed in two diameters and three widths to ensure your sophisticated preference for tire size and pressure is met with an uncompromising tire-to-rim interface. Who It's For The mountain biker who wonders what is possible, the skeptic afraid of "plastic" wheels, the weight weenie, the Clydesdale, the high-mileage guy, the weekend warrior. It would be easier to describe who it is not for… Why We Made It ENVE showed the world that a mountain bike wheel could be carbon — we're still immensely proud of that achievement. A mountain bike wheel, however, can be so much more. The M6 Series is not about technical challenges, and we refuse to chase specifications in order to be the widest, tallest, or stiffest. For the M6 Series of wheels, the question was not about carbon, rather, "What is the potential of a mountain bike wheel?" Each M6 Series wheel model is designed for the broad range of tire widths, hub configurations, and sizes so that you, the modern trail rider, can choose between them.
ENVE Composites SES 2.3C Wheelset
$2,850.00
The SES 2.3 is purpose-built for going up. Ultra-light, respectfully aerodynamic, and optimized for tubeless tires the SES 2.3 raises the bar for performance through hilly and mountainous terrain. - Front and rear optimzed depths and shapes (27mm front, 32mm rear) - 21mm internal width is optimized for ENVE 27mm tires - Hookless tubeless rim is compatible with 25mm-32mm tires
ENVE Composites SES 3.4 AR Disc Enve Alloy Hub Wheelset
$2,550.00
What It Is The SES 3.4 AR is the embodiment of the modern disc brake-only road wheelset. Aerodynamically optimized for high-volume tires (28 - 32mm), lightweight for long days in the mountains, high volume for all roads, and arguably the most versatile wheelset ENVE has ever made. Science & Insight In 2016 we launched the SES 4.5 AR, a wheelset ahead of its time. Since then, road riders, frame manufacturers, and tire makers have all caught the high-volume vision which has propelled the one-of-its-kind 4.5 AR to be our most popular wheel in North America where the high-volume all-road movement has gained the most traction. As more bikes are created that can accommodate tire clearances up to 32mm, we saw the need to create a more versatile, climber-friendly SES AR wheelset, and the SES 3.4 AR was born. Points of Differentiation - Real-world aerodynamics, optimized around 28mm to 32mm tubeless tires - Wide, Hookless Bead Anti-Pinch Flat Technology - Disc brake-specific materials and construction - Low weight leader in category - Tubeless-only design
ENVE Composites SES 3.4 Disc ENVE Alloy Hub Wheelset
$2,550.00
ENVE's most well-rounded road wheelset, the SES 3.4 is a climber with an aero edge. It's just the right depth to cover steep grades at speed. Since its introduction in 2009, the Smart ENVE System 3.4 has established itself as ENVE's most versatile and consequently most popular carbon fiber aero road wheelset amongst road cyclists of all abilities. The new SES 3.4 is wider than its predecessor (27.5mm wide external, 21mm internal) to improve rolling resistance and improve aerodynamics for use with 25mm tires and is available in both rim and disc brake models. In addition to added width, the versatile and reliable nature of the SES 3.4 has been augmented by incorporating road tubeless tire compatibility. Road tubeless compatibility means improved rolling resistance, comfort, traction, and a reduced propensity for flat tires. Like all SES models, the SES 3.4 features dissimilar rim shapes and geometries between front and back wheels to maximize aerodynamic efficiency and rideability in variable weather conditions. The front rim is 38mm deep and shallower than the rear rim to aid in crosswind stability while the rear rim is 42mm deep and therefore improves overall airflow attachment. - Intended Use: Road - Inner Rim Width: 21mm - Aero Optimized Tire Size: 25c - Rim and Disc Brake Models Available - Tubeless Optimized; Tube Compatible DISC BRAKE TECHNOLOGIES GO FAST; STOP FAST: The SES 3.4 Disc features a disc brake-specific carbon fiber rim design. In other words, this is not simply a rim brake model with no brake track. Each SES Disc rim features a disc brake-specific laminate to ensure optimal performance on disc brake-equipped road, cyclocross, and triathlon bicycles. As a result of disc brake-specific engineering the SES 3.4 Disc is substantially lighter than its rim-brake counterpart but equally as stiff and impact resistant. This is accomplished because we are able to deploy the carbon fiber that previously served the requirements for heat management to now serve the requirements for stiffness and durability. Need to know: - Disc-specific construction with no brake tracks - Rims are lighter by 40-60g per rim - Impact resistance increased - Greater lateral stiffness TUBELESS COMPATIBLE SPEED, COMFORT, PROTECTION: Greater speed, comfort, grip and puncture resistance – what's not to like about road tubeless? With the selection of a high performance tire at the right pressure, you can achieve lower rolling resistance and more speed. Tubeless also allows you to run much lower tire pressures for far greater comfort, traction, and efficiency, especially over poor road surfaces and gravel, all without sacrificing speed. The potential for pinch flats and, with sealant, debris punctures is all but eliminated. ENVE recognized early that road tubeless technology is here to stay and we drew on our years of experience making the world's best mountain bike wheels to optimize the SES range for tubeless (excluding the current SES 4.5). With rims going wider and frames giving more tire clearance, the key aspects of bike design were aligned to make tubeless the best choice: wider rims make it easier to mount tubeless tires. Disc brakes add even more benefits for tubeless, typically allowing larger tires as well as removing issues of heat at the rim. Need to know: - Tubeless optimized design - Faster rolling - Higher grip - Greater comfort - Outstanding puncture resistance
ENVE Composites SES 5.6 Disc Clincher ENVE Alloy Hub Wheelset
$2,550.00
What It Is The ultimate disc brake-specific, aerodynamic, lightweight road race wheelset. Who It's For The SES 5.6 Disc is optimized aerodynamically and structurally for disc use. Road cyclists and triathletes on disc brake bikes will benefit from the SES 5.6 Disc's reduced drag, lightweight design, and rim shape optimized for larger-volume road tires. Why We Made It Most "disc brake" wheelsets are simply repurposed rim brake wheels with disc hubs. The elimination of a braking surface opens up the realm of aerodynamic and structural possibilities. When you don't have to engineer a flat braking surface and manage high temperatures from braking, you can reduce the rim's weight, adjust shape for improved aerodynamics and provide better tubeless performance. Full Details Disc brake technology offers improved braking performance for amateur and professional road cyclists alike. Carbon fiber braking surfaces are a major design constraint that limits weight savings and rim design. By removing the constraints of a braking surface, we can completely rethink the shape of the rim. The SES 5.6 Disc features patented SES rim curvature, but has been further optimized for disc brakes. Additionally, the SES 5.6 Disc carbon fiber clinchers and tubulars are very lightweight, because the material used for rim brake heat management has been eliminated. This allows for a more structurally efficient and impact-resistant rim. Finally, the SES 5.6 Disc carbon clincher is road tubeless-compatible and can still be run with standard inner tubes and tires. Like the current generation SES carbon clinchers and tubulars, the 5.6 Disc has been aerodynamically optimized around 25mm tires.
ENVE Composites SES 6.7C Wheelset
$2,850.00
ENVE let the science guide their quest for the ultimate aero road wheel and the SES 6.7 resulted. Beyond 70mm depth, aero gains taper off as weight increases. The SES 6.7 strikes the ultimate balance between aero efficiency, stability, and weight savings. The SES 6.7 replaces the venerable SES 7.8 as the flagship aero wheel model in the SES lineup due to its lower weight, greater versatility, and matched drag reduction. - Front and rear optimized profiles (60mm front, 67mm rear) - 25mm internal width optimized for 27mm ENVE tires - Hookless tubeless rim is compatible with 28mm-50mm tires
DT Swiss Disc Brake Rotor Adaptor Center Lock/6-Bolt
$21.00
DT-Swiss Center Lock Adaptor. Allows 6-bolt rotors to be used on Center Lock hubs. - Rotor thickness between 1.8mm and 2.2mm - Easy assembly and only 29g - Made in Switzerland by DT Swiss - 230mm version accepts all rotors up to 203mm diameter - 160mm version accepts all rotors up to 160mm diameter
DT Swiss RWS MTB Rear Thru Axle - X-12
$38.90
When mounting a wheel quickly and safely, the RWS system is untouchable. It combines the fast mounting of a conventional quick release with the force and safety of a fitting. The high-precision toothing at the inside of the lever allows you to fully tighten the axle and perfectly position the lever. - Ratcheting system tightens skewers with turns rather than a cam - Lever can be rotated into an ideal position after tightening - Conical X12 washer, compatible with Syntace X-12 system - Thread Pitch: 12 x 1.0mm
Zipp 404 Firecrest Carbon Clincher Tubeless Disc Brake 700c Front
$1,150.00
If you had to choose just one wheel, the 404 Firecrest should be your choice. With the depth and shape proven in all conditions it's the all-around performer and standard by which all aero wheels are measured. At the center of the wheelset is Zipp's 77/177 hubset, an innovation that results in improved stiffness, durability, simplicity and versatility - Firecrest rim technology affords the rider more speed, more stability, and more strength. This technology offers stable, predictable handling, and the wider rim increases lateral stiffness while offering greater vertical compliance - Each wheel includes Zipp quick release skewer, end caps that can be swapped to run 12mm or 15mm thru axle; 1 Zipp 700c X 20mm rim tape, and 1 Zipp tubeless valve
Page 1 of 2 Next page