Mountain

Whether it's tearing around an XCO track or setting your personal best up a local hill, the Twostroke has you covered. RADICAL GEOMETRY - A 67° head angle, long front-end, and 75° seat angle to attack steep and loose terrain with the perfect weight distribution. INTERNAL CABLE ROUTING - Fully guided internal cable routing for easy installation and a clean look. INTEGRATED PROTECTION - Molded covers on the chainstay, an integrated chain suck plate, and helicopter tape on the downtube ensure durability and a sleek design. WIDE TIRE CLEARANCE - Fully compatible with the new generation of wide XC tires.

Whether it's tearing around a local XCO track or setting your personal best up a local hill, the Twostroke has you covered. A fresh approach to hardtail design, the Twostroke is not only an efficient climber but designed for a controlled ride even on the most technical XC courses. The Fourstroke-inspired design enriches your experience, allowing riders to attack the terrain with full confidence and master every challenge. Technology: - Radical Geometry: A 67° head angle, long front-end and 75° seat angle to attack steep and loose terrain with the perfect weight distribution. - Tuned Compliance Concept (TCC): Take the edge off the roughest roads to push harder and ride further. The ultimate balance between comfort and performance for a ride that is both forgiving and fast. - Internal Cable Routing: Fully guided internal cable routing for easy installation and a clean look. - Integrated Protection: Molded covers on the chainstay, an integrated chain suck plate and helicopter tape on the downtube ensure durability and a sleek design. - Integrated Fork Stopper: Frame protection for increased stiffness in a straight downtube design. - Wide Tire Clearance: Fully compatible with the new generation of wide XC tires. - Dropper Post Ready: A dedicated shim allows the installation of a 27.2 mm dropper post with stealth cable routing.

Level Up. A mountain bike built to raise your game and ignite a passion for the trail. Designed for the mountains and ready for anything. Highlights - Light and durable SmartForm C3 Alloy frame - SR Suntour XCT suspension fork, 100mm travel - Shimano 8-speed drivetrain w/double chainring crank / Shimano hydraulic disc brakes Where it thrives - Low-impact trails, gravel roads, leisurely ride What it's built for - Handling, durability Wheel size: - Sizes X-Small – Small: 27.5-inch - Sizes Medium – X-Large: 29-inch

Level Up A mountain bike built to raise your game and ignite a passion for the trail. Designed for the mountains and ready for anything Where it thrives Low-impact trails, gravel roads, leisurely ride What it's built for handling & durability Highlights - Light and durable SmartForm C3 Alloy frame - SR Suntour XCM suspension fork, 100mm travel. - Shimano 8-speed shifting with double chainring crank / Shimano hydraulic disc brakes SmartForm C3 Alloy Simple yet sophisticated aluminum construction yields a light, lively frame that outperforms anything in its class SAVE Micro-suspension Delivers a smoother, more controlled ride thanks to strategically engineered flex zones built into the frame's rear triangle Slack and Stable A slack 68 degree head angle creates exceptionally stable handling so that you can charge the descents with confidence Right-Sized Wheels The smaller sizes of Trail roll on 27.5" wheels, while the larger sizes come with 29" wheels to deliver the best blend of fit, fast and fun for every rider StraightShot Internal Cable Routing For an integrated look and easy maintenance, the shift and dropper post cables route cleanly through the StraightShot window in the down tube, while the rear brake line is secured outside the frame

Level Up. A mountain bike built to raise your game and ignite a passion for the trail. Designed for the mountains and ready for anything Where it thrives Low-impact trails, gravel roads, leisurely ride What it is built for Traction, handling, durability Highlights - Light and durable SmartForm C3 Alloy frame - SR Suntour XCT suspension fork, 100mm travel - Shimano 8-speed shifting w/double chainring crank / Shimano hydraulic disc brakes Intellimount Stem A convenient mount on the stem will securely hold any SP-Connect compatible smartphone case, creating a dashboard display for speed, mileage and more with the Cannondale App SmartForm C3 Alloy Simple yet sophisticated aluminum construction yields a light, lively frame that outperforms anything in its class Tapered Headtube Featuring tapered steerer tubes found on the best suspension forks SAVE Micro-suspension Delivers a smoother, more controlled ride thanks to strategically engineered flex zones built into the frame's rear triangle Slack and Stable A slack 68 degree head angle creates exceptionally stable handling so that you can charge the descents with confidence StraightShot Internal Cable Routing For an integrated look and easy maintenance, the shift and dropper post cables route cleanly through the Straight Shot window in the down tube, while the rear brake line is secured outside the frame Flat Mount Disc Brakes The ultra-light forged brake mount is compatible with modern flat-mount calipers, making adjustments or future upgrades easier

From parkways to paths, paved roads or dirt, this versatile flat-bar bike can help you reach new fitness goals or add some spice to your daily commute. KEY PERFORMANCE FACTORS All-terrain versatility With a mountain bike style flat handlebar, suspension fork and disc brakes, you can ride road or dirt with confidence. Lightweight and durable Frameset constructed with high-quality ALUXX aluminum. Comfort and stability Frame geometry puts the rider in a position that balances efficiency with stability on rough roads, paths or trails.

PUSH THE PACE ON CLIMBS, LET LOOSE ON THE DESCENTS. THIS ALUMINUM HARDTAIL GIVES YOU A FEEL FOR THE TRAIL WITH BALANCED, CONFIDENT HANDLING AND A PLUSH SUSPENSION FORK. KEY PERFORMANCE FACTORS Proven alloy performance ALUXX aluminum frameset is hand-built in-house by the world leader in aluminum engineering. Balance and stability Frame geometry is designed to optimize the balance and roll-over capabilities of 29-inch wheels or the liveliness of 27.5-inch wheels (depending on frame size). XC control Suspension fork offers either 80mm or 100mm of smooth travel for added XC control. Wheel size: Sizes X-Small – Medium: 27.5-inch Sizes Small – X-Large: 29-inch

Get a feel for the trail with this all-new aluminum hardtail made for aspiring singletrack riders. It features stable, fast-rolling 29-inch or more-playful 27.5-inch wheels so you can push the pace on climbs and let loose on the descents. Built on a new lightweight ALUXX aluminum frame that features classic hardtail design plus the balanced riding characteristics of either larger diameter 29-inch or 27.5-inch wheels, Talon is a great choice for XC or light trail terrain. The frame geometry is specifically designed to adapt to its respective wheel size and either an 80mm or 100mm suspension fork (depending on frame size). It’s a confident ride that’s perfect for ambitious riders who want to take their off-road skills to the next level. Proven alloy performance ALUXX aluminum frameset is hand-built in-house by the world leader in aluminum engineering. Balance and stability Frame geometry is designed to optimize the balance and roll-over capabilities of 29-inch wheels or the liveliness of 27.5-inch wheels (depending on frame size). XC control Suspension fork offers either 80mm or 100mm of smooth travel for added XC control. Wheel size: Sizes X-Small – Medium: 27.5-inch Sizes Small – X-Large: 29-inch

Push the pace on climbs, let loose on the descents. This aluminum hardtail gives you a feel for the trail with balanced, confident handling and a plush suspension fork. Built on a lightweight ALUXX aluminum frame that features classic hardtail design and the balanced riding characteristics of either larger diameter 29-inch or 27.5-inch wheels, Talon is a great choice for XC and trail riding. The frame geometry is specifically designed to adapt to its respective wheel size and either an 80mm or 100mm suspension fork (depending on frame size). It's a confident ride that's perfect for ambitious riders who want to take their off-road skills to the next level. Wheel size: - Size X-Small: 27.5-inch - Sizes Small – Medium: 27.5-inch or 29-inch - Sizes Large – XX-Large: 29-inch

Built with a lightweight ALUXX aluminum frameset and FlexPoint single-pivot rear suspension setup, Stance is a great way to improve your trail riding. Its 27.5+ wheel and tire compatibility give it a plush ride quality that soaks up bumps and adds more traction and stability. Combined with 120mm of smooth suspension travel front and rear, it's a confident ride that will have you nailing new lines.

MODERN MOUNTAIN BIKE TRAILS ARE FUN, FLOWY AND CHALLENGING. THIS FULL-SUSPENSION 29ER GETS YOU IN SYNC WITH THE TERRAIN, SO YOU CAN RIDE WITH MORE CONFIDENCE AND HAVE MORE FUN. KEY PERFORMANCE FACTORS Attainable trail performance Handcrafted with lightweight, stiff and durable ALUXX aluminum, it's the perfect entry to full-suspension performance. Smooth suspension FlexPoint Suspension technology helps you tackle challenging terrain and improve your trail riding capabilities. 29er confidence and control Larger diameter wheels roll over rugged terrain with balance and stability, giving you the momentum to tackle technical climbs and the confidence to fly on singletrack descents.

Float through rock gardens, hit the jumps, and find the faster line. With quick-handling 27.5 wheels and adjustable frame geometry, this lively trail bike is a party on wheels. Built for those who favor the responsive, agile handling of 27.5 wheels, this trail ripper features flip chip that lets you adjust the frame geometry for riding style and terrain. You can choose a steeper or slacker headtube angle and either a 20mm or 30mm bottom bracket drop. The ALUXX SL aluminum frame is fitted with updated Maestro rear suspension featuring 145mm of smooth, active rear travel. A trunnion-mount shock and Advanced Forged Composite rocker arm help soak up bumps, giving you traction and control to float through rocks, roots and ruts. Confidence is further bolstered by a 160mm travel suspension fork up front.

FROM FAST, ROWDY DESCENTS TO TECHNICAL TERRAIN, THIS PROGRESSIVE TRAIL BIKE GIVES YOU ACTIVE SUSPENSION, ADJUSTABLE FRAME GEOMETRY, AND EVERYTHING YOU NEED TO UP YOUR SINGLETRACK GAME. KEY PERFORMANCE FACTORS 29er confidence and control 29-inch wheels optimized to roll over technical terrain with balance and stability, giving you more momentum on tricky climbs and confidence to fly on fast singletrack descents. Added clearance for up to 2.5-inch tires. Progressive suspension Maestro rear suspension features a trunnion mount shock with a longer stroke and smoother feel. With 135mm of full rear-wheel travel (and 150mm up front), it features an Advanced Forged Composite upper rocker arm for increased stiffness and strength plus lower overall frame weight. Adjustable geometry A flip chip lets you change the headtube and seattube angles, along with the bottom bracket height, to fine-tune the handling. You can choose the low position (65.5/77.2 head/seattube angle and 40mm BB drop) for fast, open terrain, or high (66.2/77.9 head/seattube angle and 30mm drop) for slower, tighter singletrack.

Shred hard and shred fast with this lively 29er. It's built on an all-new full-composite frame with adjustable geometry, giving you smooth control to blitz technical trails at speed. This versatile trail bike features a full composite frame that's fitted with a new Maestro suspension system that has 5mm more travel than the previous generation. The Advanced Forged Composite rocker arm has a flip chip that allows you to adjust frame geometry. Choose steeper or slacker headtube/seattube angles and either a 35mm or 45mm bottom bracket drop to adjust the handling for your riding style and terrain.

This full-composite frame is engineered for 135mm of rear travel and 150mm up front. The Maestro rear suspension has a two-stage adjustable Advanced Forged Composite rocker arm with a trunnion-mount shock. A flip chip lets you choose either low or high frame geometry settings, which adjusts the headtube and seattube angle, along with the bottom bracket drop, to fine tune handling for your riding style and terrain.

The Ripley AF is the beloved, category-defying, short-travel, singletrack-scorching Ripley - rendered in aluminum, with more aggressive geometry. All the sizzle and pop of the carbon Ripley, now available as a complete bike at a wallet friendly price. A trail-friend­ly 65.5-degree head angle and short (44mm) off­set 130mm fork com­bined with 29” wheels makes for a super plant­ed but still play­ful front end feel. A 76-degree seat angle puts your pow­er direct­ly to the ped­als, while the short chain­stays and ped­al-friend­ly dw-link kine­mat­ics deliv­er that pow­er with­out squan­der­ing a sin­gle watt. The 15-year col­lab­o­ra­tion with Dave Wea­gle has yield­ed yet anoth­er bike with unpar­al­leled climb­ing effi­cien­cy and tractabil­i­ty. Incred­i­ble snap and respon­sive­ness are its trade­marks, and a whole mess of plush, chun­der-eat­ing, down­hill-crush­ing good­ness gets thrown in for good mea­sure. Wrap that togeth­er and you get the best sus­pen­sion you’ll find any­where. It’s that good.

The Ripmo AF (Aluminum Frame) brings the award-winning performance of the carbon Ripmo to a wider, rowdier audience. It’s everything we love from the carbon Ripmo, plus a few tweaks. Over a long tenure from moun­tain biking’s awk­ward ado­les­cence to its cur­rent any­thing-shred­dy era, we’ve exper­i­ment­ed with steel, alu­minum and tita­ni­um?—?remem­ber the Bow-Ti, the first super­bike? We remem­ber the met­al times too, and it feels good to offer a pre­mi­um ride expe­ri­ence to the broad­en­ing fam­i­ly of rid­ers, cour­tesy of durable, afford­able alu­minum alloy. With a steep, 76-degree seat tube angle and a rangy but not stratos­pher­ic reach, the Rip­mo AF places rid­ers cen­tral­ly and upright over the bot­tom brack­et. It makes for an effi­cient posi­tion that can go the long haul with­out plac­ing too much weight on its slack, 64.9-degree head­tube angle. A 44mm reduced-off­set fork is more sure­foot­ed on steep descents and stead­ies high speeds. Bet­ter up, bet­ter down.

Introducing the Exie for all. Sharing the same geometry and performance as the World Cup winning Exie USA, the newest offering is hand built in Vietnam. It’s everything loved about the US made offering in a wallet-friendly build. Whether you’re rac­ing short track or on a mul­ti day epic, the Exie’s seat tube angles allows you to har­ness your strongest mus­cles, while reduc­ing any poten­tial knee or wrist strain. Ibis also steep­ened the seat tube angles as the frames get larg­er, to allow rid­ers with dif­fer­ent inseams to achieve the same rid­ing positions. Don’t squan­der a sin­gle watt. The dw-link sus­pen­sion plat­form offers incred­i­ble climb­ing effi­cien­cy and trac­tion along with plush, down­hill-crush­ing goodness. The Exie use bush­ings where it makes sense and bear­ings where it doesn’t. The IGUS bush­ings in the low­er link are lighter, stiffer, and vir­tu­al­ly main­te­nance free. Ibis also added fea­tures like a thread­ed bot­tom brack­et to help make any future main­te­nance easy. Inter­nal cable rout­ing doesn’t have to be a pain. Ibis has added inter­nal tubes to their tubes, no pick­sets, flash­lights, or swear words required. 2.4” Tire clearance means you can run over­built, chunky tires; you can run light, big vol­ume fast tires, but what­ev­er you run, you’re not lim­it­ed by width.

What if we took everybody's favorite bike and made it a little slacker and little longer? Hell, what if we made it more progressive and coil compatible? And, that's exactly what we did for the Ripmo V2. Active ingredients include: 29" wheels, berm-defying cornering tendencies, and a love for long rides. The Rip­mo and Rip­mo AF share the same steep, 76-degree seat tube angle and a rangy but not stratos­pher­ic reach, which places rid­ers cen­tral­ly over the ped­als. It makes for an effi­cient posi­tion that can go the long haul. The slack 64.9 head­tube angle and 44mm reduced-off set fork doesn't wan­der while climb­ing, and doesn't hold you back descend­ing. It works—all day up, all day down, all day in between. TRACTION TUNE Our cus­tom-tuned front and rear sus­pen­sion fea­ture extra-light high-speed com­pres­sion and rebound damp­ing to deliv­er unpar­al­leled trac­tion. This allows the wheels to flut­ter through ter­rain like a tro­phy truck storm­ing through a set of whoops. COIL COMPATIBLE The Rip­mo V2 is com­pat­i­ble with both coil and air shocks due to a more pro­gres­sive lever­age rate. On the trail, it gives the sus­pen­sion a sup­ple feel throughout the entire­ty of the stroke, enhanc­ing trac­tion no mat­ter how deep you dig. DROPPER POST CLEARANCE Mo' drop­per, mo' bet­ter. On small frames, you can run 125 – 150mm, depend­ing on your pref­er­ence and inseam length. On Medi­um, Large, and X-Large, a 160mm—or, why not run a 185mm? Our short­er seat-tube lengths and low standovers allow you to choose your size based on your reach preference. TIRE CLEARANCE You can run over­built, chunky tires; you can run light, big vol­ume fast tires, but what­ev­er you run, know that you're not lim­it­ed by width. BUSHINGS Tired of hit­ting "pur­chase" on anoth­er set of bear­ings each sea­son? So were we. That's why we use bush­ings where they make sense, and bear­ings where they don't. The IGUS bush­ings in our low­er link are lighter, stiffer, and vir­tu­al­ly main­te­nance-free. We believe so strong­ly in them, we back them with a free life­time replacement. LIGHTWEIGHT PREMIUM CARBON FOR EVERYONE All our bikes are built from the high­est-grade mate­ri­als and opti­mized for the best strength, weight, stiffness, and ride per­for­mance-no mat­ter how much you spend. The Rip­mo weighs a svelte 6.25 lbs with a DPX2 shock, and com­plete builds start at 28 lbs. INTERNAL CABLE ROUTING Bikes that look pret­ty on the out­side should look pret­ty on the inside. We use car­bon fiber tubes mold­ed with­in each frame. Push the cable in, watch it pop out, a beau­ti­ful moment indeed. REMOVABLE ISCG MOUNT So, you're too fast for nar­row-wide chain reten­tion on its own? Chal­lenge accept­ed. Our remov­able ISCG tabs allow shred­ders to bolt on a chain guide, while the rest of us can shave grams. PROTECT YOUR INVESTMENT A poly­car­bon­ate down­tube pro­tec­tor deflects debris, while mold­ed rub­ber swing arm pro­tec­tors keep things qui­et and clean. And, our sim­ple-yet-ele­gant link­age pro­tec­tors stop mud and rocks thrown by the tire, keep­ing your beau­ti­ful bike beautiful.

The Ripley is the snappy, flickable, playful, fast, lightweight, and versatile 29” trail bike. Its combination of modern geometry, a stiff lightweight carbon chassis, and 120mm of ultra efficient dw-link travel, means it’s equally happy popping off bonus lines as it is crushing all day epics. LONGER, SLACKER, STEEPER With its well bal­anced mod­ern geom­e­try, the Rip­ley is ready for any adven­ture. The long front end, slack head angle, and short rear end gives you the con­fi­dence to try new lines, while the steep seat tube angle and short­er off­set fork makes it easy to maneu­ver tech­ni­cal climbs and flowy singletrack. REVISED SWINGARM The Rip­ley V4S fea­tures a new UDH dérailleur for max­i­mum future com­pat­i­bil­i­ty and moves to a 55mm chain line. The wider chain line allows for a stiffer chainstay.

With the Sniper T we have created a pure full-suspension cross-country trail bike with a true INTENSE spirit. With the same soul as its sibling the Sniper XC, it features a super lightweight full carbon frame, rolling on 29" wheels, with progressive XC trail geometry but this time with 120mm of travel. The extra 20mm of suspension means that the Sniper T is still all about off-road speed…both up and down, but that you get a slightly plusher ride. It is fast, fiery, and fun, and a truly innovative XC trail bike…INTENSE style. It's all about the geometry. Long, low, and slack is no longer just for the downhill crowd, it's the 'new normal' for XC trail bikes too…it's really a game-changer. We believe that short-travel bikes should descend like their long-travel siblings, so with the Sniper T, we've created an XC trail bike with an aggressive DH spirit. It loves going uphill, but it always has one eye on the descents. A longer top tube, shorter stem, wider bars, lower bottom bracket, and slacker head angle all make for an exciting yet balanced bike. It is a complete system that is designed to work as one. The Sniper T's numbers are progressive, with geometry and design that's normally only seen on trail or enduro bikes…but it works. With sharp and crisp handling, and responsive pedaling, it is confident and efficient on the climbs—and with its extra travel, it is now even more stable, controlled, and direct on the descents. Add into that mix dropper posts and 1x12 gearing and you have what we believe to be the ultimate cross-country trail bike. We know that riding the Sniper T will fill you with confidence. Climbing, descending, or cruising along…it does it all with a powerful yet efficient ease. The way the Sniper covers the ground so quickly and effortlessly is inspiring and it is nothing short of a revelation on the descents. The Sniper T is our trail bike thrasher, and it's got the INTENSE spirit through and through. Sitting in the middle ground between a full-on XC bike (Sniper XC) and a slightly longer travel trail bike (Primer) the Sniper T offers the best of both worlds. You won't be disappointed. It's everything you could want in a modern-day cross-country trail bike.

TRUE TO THE TRAIL. Our 140mm/150mm travel Primer 29 trail bike is pure perfection…everywhere. Rolling on super-fast 29" wheels the Primer 29 will give you trail-flattening speed over any obstacle, both on tough climbs and technical descents. In short, the Primer 29 is the ultimate all-round premium trail bike. It could be the only mountain bike you’ll ever need.

Our 140mm/150mm travel Primer 29 trail bike is pure perfection…everywhere. Rolling on super-fast 29" wheels, the Primer 29 will give you trail-flattening speed over any obstacle, both on tough climbs and technical descents. In short, the Primer 29 is the ultimate all-around premium trail bike. It could be the only mountain bike you'll ever need. The Primer 29 trail bike is the most versatile model in our range. With 140mm of rear travel and 150mm up front, we have designed a bike that is capable and balanced off road, but also nimble and fun at the same time. The Primer is a bike that is equally at home on long all-day rides, laps in your local woods, or multi-day adventures. It gives a confidence-inspiring trail ride and is the ultimate all-rounder. The frame is the heart and soul of any bike, and all of our Primers are built around our perfectly designed monocoque carbon frame, with a dual-strut design rear triangle, optimized carbon fiber layup, a carbon top link, titanium hardware throughout, and internal (and silent) tubes for shifter, dropper post, and brake routing. Additional features include ISCG05 mounts, Flak guard armor frame protection on the downtube, a threaded bottom bracket shell, and our adjustable 'Flip Chip' technology.

BUILT FOR ENDURO. An Enduro bike needs to do two things: eat-up mountainous terrain on the downhills, and climb back up to do it all again. With our new Tracer we believe we have made a bike that can do just that. Borrowing design inspiration and technology from our M29 downhill bike, utilizing its bottom link driven rear shock and suspension design, we have created a bike with plush travel for the roughest of descents, and a firm pedal platform when needed. We’ve positioned the rear shock low down and centered in the frame, allowing the Tracer to descend and handle terrain impeccably. The INTENSE Tracer 279 Enduro bike has been completely reengineered for 2022. With 170mm (6.7”) of travel and a staggered wheelset (29” front/ 27.5” rear), we have created a bike that is stable and capable while also fast, fun and agile.

PURE SPEED MACHINE. With the Sniper T we have created a pure full-suspension cross-country trail bike with a true INTENSE spirit. With the same soul as its sibling the Sniper XC, it features a super lightweight full carbon frame, rolling on 29" wheels, with progressive XC trail geometry but this time with 120mm of travel. The extra 20mm of suspension means that the Sniper T is still all about off-road speed… both up and down, but that you get a slightly plusher ride. It is fast, fiery and fun, a truly innovative XC trail bike…INTENSE style.

BUILT TO PUSH THE LIMITS OF ENDURO. The "S" model designation is given to a build/model that pushes the limits of that segment. The new Tracer S model pushes the limits of Enduro/Freeride with a top-spec Ohlins suspension platform, DH casing tires, and powerful Magura MT7 Pro brakeset. Borrowing design inspiration and technology from our M29 downhill bike, utilizing its bottom link driven rear shock and suspension design, we have created a bike with plush travel for the roughest of descents, and a firm pedal platform when needed. We’ve positioned the rear shock low down and centered in the frame, allowing the Tracer to descend and handle terrain impeccably. COMPLETELY REDESIGNED. The INTENSE Tracer S Enduro bike has been completely reengineered for 2022. With 170mm (6.7”) of travel and a staggered wheelset (29” front/ 27.5” rear), we have created a bike that is stable and capable while also fast, fun and agile. STAGGERED WHEELS = STAGGERING SPEED. The Tracer S has been designed around a staggered wheelset. Taking what we've learned from our staggered wheel Tazer, we've found a great balance of agility and stability. When the trails get tight or you're looking to shave time off of race stages, the new Tracer is ready. FLIP CHIP GEOMETRY ADJUSTMENT. The INTENSE Tracer 279 has a ‘Flip Chip’ feature which allows you to alter the geometry of your bike between two positions. The bike comes from our factory in the HI (High) setting. The HI setting is engineered to perform the best in the roughest and most technical terrain. The LO setting is engineered to perform the best in slightly smoother, high speed trails such as what could be found in many bike parks. The LO setting will slacken the head angle a little, lower the bottom bracket and standover, shorten the reach by 5mm, creating slightly firmer suspension.. What position you have the Flip Chip in comes down to personal preference, riding style and the type of terrain you normally ride on. The Flip Chip on the INTENSE Tracer 279 is located on the Lower Link of the suspension system where it bolts onto the rear shock. With the bike fully built the Flip Chips are hidden, so in order to gain access to them you will need a 5mm Allen key and a torque wrench. The basic process involves removing the rear wheel, unbolting the Rear Triangle from the Top Link, which will then give you access to the Bottom Link and the Flip Chips.

Saving weight means little without retaining an appropriate level of stiffness and responsiveness too. So we've taken all the acceleration and out-of-the-saddle sprint qualities of a carbon XC race rocket and fused them with a rear-end that still rails corners like a hardcore trail bike. This unique XC-trail attitude is also reflected in the geometry. The head tube angle (67.1 degrees) and reach (425mm) are a little steeper and shorter than a Joplin to meet the demands of aggressive climbing, yet the Wilder's seat tube angle is a touch slacker and the chainstays a little longer than a Joplin too in order to retain that familiar Juliana confidence on descents. And talking of chainstays, each chainstay length is specific to the individual frame size; meaning riders of every height enjoy the same handling and performance no matter what. Beyond the details, there are some bigger features that amplify this XC wild child's abilities. Rapid rolling 29-inch wheels are paired with a 120mm fork to tame the feral lines and smooth the sketchiest of passing maneuvers. There's even room for two water bottles within the front triangle for bigger training and racing days.

The Trail Bikes that Love to Play The Juliana Furtado has always been more capable than many expected. But now with a high-traction 29-inch wheel up front, a maneuverable 27.5-incher out back, and even more refined suspension, their touch is even more deft on the trails. Featuring a 140mm fork and 130mm of VPP rear suspension travel, Furtado was made for sporty performance.

Equipped to handle anything — embrace paved roads, paths, and dirt trails with confidence and style. Versatility With Liv’s Purpose Driven Design, relaxed style, and lightweight ALUXX-Grade aluminum frame, Bliss is ideal for city roads or around town trails. Perfect Fit The LivRight Sizing Philosophy ensures the best fit for women for a truly comfortable ride. Smooth Handling A front suspension fork provides the perfect balance of capability and ease. Why We Love It Designed to bring the best of both road and mountain worlds together. Bliss delivers front suspension, on a 26-inch or 27.5-inch wheel size for stability with great traction from wider tires, and a relaxed riding position that keeps you more upright and comfortable in the saddle. Pedal efficiency, super lightweight design, and a sleek setup makes commuting and adding miles to your ride a breeze. Liv’s 3F Design Philosophy lets us create bikes that are specifically tuned for female riders, balancing riders properly over the bottom bracket and ensuring they get the most confidence-inspiring position. Integrated dropouts allow you to install a rack or add a kickstand to transform the bike into a capable commuter or weekend adventurer.

GET ON THE DIRT AND RIDE YOUR WAY TO YOUR FIRST SINGLETRACK.TEMPT IS THAT FRIEND THAT OPENS A WHOLE NEW WORLD TO YOU. KEY PERFORMANCE FACTORS Confidence Inspiring Perfect as your first mountain bike, the ALUXX-Grade Aluminum frame is lightweight, capable and durable. Versatile Tempt’s performance-minded yet comfortable geometry gives it the versatility for both commutes around campus and off-road rides. Liv 3F Design Philosophy Women’s-specific geometry ensures the rider is balanced over the bike for optimal efficiency, comfort and control. WHY WE LOVE IT With a lightweight ALUXX-Grade aluminum frame designed specifically for women, Tempt can guide you along dirt terrain with speed, efficiency and control. A front suspension fork and powerful disc brakes offer added confidence and control. This hardtail has a low standover height to give you confidence maneuvering around dirt trails and is offered in 27.5 or 29-inch wheels for optimum fit and efficiency. Perfect for a functional around-town ride, to try as your first off-road racing bike, or for venturing out onto the trails for the first time, allow Tempt to lead you to new adventures. Wheel size: Sizes X-Small – Small: 27.5-inch Sizes Small – Large: 29-inch